I-H07V2-K MARD YAMANZI IKHAYA LOKUFUNDA
Ukwakhiwa kwentambo
Imingxunya ye-bare ye-bare
Imigca kwi-vde-0295 iklasi-5, IEC 60228 iklasi-5, Bs 6360 c. I-5 ne-HD 383
I-PVC yobushushu obukhethekileyo i-PVC TI3 i-Dist kwi-Din Vint 0281 INXALENYE 7
I-Cores ukuya kwi-vde-0293 imibala
H05V2-K (20, 18 & 17 OWG)
H07V2-k(16 Awg kwaye inkulu)
Intambo ye-H07V2-K yamandla e-H07V ihambelana nemigangatho ye-EU kwaye yenziwa njengentambo ye-core enye enezinto ezilungileyo zokugoba.
Abaqhubi banokufikelela kubushushu obuphezulu abangama-90 ° C, kodwa abacetyiswa ukuba basebenzise ngaphezulu kwe-85 ° C xa banxibelelana nezinye izinto.
Iintambo zihlala zilinganiswe ngo-450 / 750v kwaye abaqhubi banokuba ngabaphuli okanye bangamatshini othengiweyo kuluhlu lwe-geour ukusuka kwi-gauges ukusuka kwi-gaugs enkulu, ngokukodwa i-1.0mm².
Isixhobo se-sublyvinyl pherviny (PVC), edibana nemigangatho yendalo esingqongileyo kwaye igqithile kuvavanyo olufanelekileyo lokuhlawula ilangatye, umzekelo, i-HD 405.1.
Ubuncinci be-radius radius yi-10-16 ububanzi bekhebhasi yentambo yokufaka kunye nokufana kweselula kulele.
Iimpawu zobugcisa
I-voltage esebenzayo: I-300 / 500V (h05v2-k)
I-450 / 750V (h07V2-k)
I-Voltage yoVavanyo: ngo-2000 i-volts
Ukutshintsha kweRadius: 10-15x O
Ukugoba i-radius radius: 10-15 x o
Ubushushu obuguqukayo: + 5O ukuya + 90o c
Iqondo lokushisa eliqingqiweyo:
Iqondo lokushisa esifutshane: + 160o c
Ilangatye liyintoni: IEC 60332.1
Ukunganyangeki kwe-insenter: 20 mω x km km
Imigangatho kunye nokuqinisekiswa kweziqinisekiso ze-H05V2-K I-KOROROROROROR ZIYAFUMANEKA
HD 21.7 S2
I-Cei 20-20
I-Cei 20-52
IVDE-0281 Icandelo 7
I-CE iphantsi kwe-voltage i-73/23 / i-EEC kunye ne-93/68 / EEC
Isiqinisekiso se-rohs
Le migangatho kunye netikitingting uqwalaselo Qinisekisa ukuba intambo yamandla iH05v2 k iyathobela ngokwendlela yokusebenza kombane, ukhuseleko kunye nokukhusela kwendalo.
Iimbonakalo
Ukugoba okuguqukayo: Uyilo luvumela ukuguquguquka okuhle kumiselo.
Ukuxhathisa ubushushu: Ifanelekile kwiimeko zobushushu obuphezulu, ezinje ngokusebenzisa i-Motors, abaguquli kunye nezinye izixhobo zemveliso
Imigangatho yokhuseleko: ihambelana neVDE, CE kunye nezinye iziqinisekiso ezifanelekileyo ukuqinisekisa ukhuseleko lombane.
UKUKHUSELEKA KWEEMVIYO
Uluhlu olubanzi lwamaqondo obushushu asebenzayo, unokumelana nobushushu obuphakathi phantsi kweemeko eziqhelekileyo zokusebenzisa.
Uluhlu lwesicelo
Unxibelelwano lwangaphakathi lwezixhobo zombane: Ilungele uqhagamshelo lwangaphakathi lwezixhobo ze-elektroniki kunye nombane.
Ukulungiswa kokukhanya: kungasetyenziselwa uqhagamshelo lwangaphakathi nangaphandle lweenkqubo zokukhanyisa, ngakumbi kwiindawo ezikhuselekileyo.
Iisekethe ezilawulayo: Ilungele iisekethe ezilawula imiqondiso kunye nolawulo.
Iindawo zemizi-mveliso: Ngenxa yeepropathi zayo ezingapheliyo, zihlala zisetyenziselwa unxibelelwano lwamandla kwisixhobo esiphezulu sobushushu esifana noomatshini abahlukeneyo kunye neenqaba ezomileyo.
Ukunyuka komhlaba okanye ukususwa emgangathweni
Nceda uqaphele ukuba izikhokelo zoMvelisi kunye neekhowudi zombane zendawo kufuneka zilandelwe izicelo ezithile zokuqinisekisa ukhuseleko kunye nokuthotyelwa.
Ipharamitha yecabula
| I-awg | Hayi. Ye-Cous X | Ubungqingqwa bokufakwa | Ububanzi buphi | Ubunzima be-Copper | Ubunzima bokuthintela |
| # x mm ^ 2 | mm | mm | kg / km | kg / km | |
| H05v2-k | |||||
| 20 (16/32) | 1 x 0.5 | 0.6 | 2.5 | 4.8 | 8.7 |
| (24/32) | I-1 x 0.75 | 0.6 | 2.7 | 7.2 | 11.9 |
| 17 (32/32) | 1 x 1 | 0.6 | 2.8 | 9.6 | 14 |
| H07V2-k | |||||
| 16 (30/30) | 1 x 1.5 | 0,7 | 3.4 | 14.4 | 20 |
| ((50/30) | 1 x 2.5 | 0,8 | 4.1 | 24 | 33.3 |
| (56/28) | 1 x 4 | 0,8 | 4.8 | 38 | 48.3 |
| 10 (84/28) | I-1 x 6 | 0,8 | 5.3 | 58 | 68.5 |
| 8 (80/26) | 1 x 10 | I-1,0 | 6.8 | 96 | 115 |
| 6 (128/26) | I-1 x 16 | I-1,0 | 8.1 | 154 | I-170 |
| 4 (200/26) | 1 x 25 | I-1,2 | 10.2 | I-240 | 270 |
| 2 (280/26) | I-1 x 35 | I-1,2 | 11.7 | 336 | 367 |
| 1 (400/26) | I-1 x 50 | I-1,4 | 13.9 | 480 | I-520 |
| 2/0 (356/4) | I-1 x 70 | I-1,4 | 16 | I-672 | I-729 |
| I-3/0 (485/24) | I-1 x 95 | I-1,6 | 18.2 | I-912 | I-962 |
| I-4/0 (614/4) | I-1 x 120 | I-1,6 | 20.2 | I-1115 | 1235 |
| I-300 MCM (765/24) | I-1 x 150 | I-1,8 | 22.5 | I-1440 | I-1523 |
| I-350 mcm (944/24) | I-1 x 185 | I-2,0 | 24.9 | 1776 | 1850 |
| I-500mcm (1225/24) | I-1 x 240 | I-2,2 | 28.4 | 2304 | 2430 |
