H05RR
Ukwakhiwa kwentambo
Imingxunya ye-bare ye-bare
Imigca kwi-VDde-0295 iklasi-5, IEC 60228 iklasi-5
I-rubber ecekeceke i-EI4 ukuya kwi-VDE-0282 yenxalenye-1
Ikhowudi yemibala yeVDE-0293-308 kunye ne-HD 186
I-Green-tyheli i-Green-tyheli, abaqhubi aba-3 nangaphezulu
I-PolyctchloroOpreol Subber (i-neoprene) jacket em3
Imigangatho yokwenza: Imigangatho yesalathiso yeH05rr-fIkheyi ibandakanya i-Bs En 50525-2-22: 2011 kunye ne-IEC 60245, kwaye imveliso iqinisekisiwe yiVDE.
I-Voltage Retage: I-AC ye-AP ye-AC i-300 / 500v.
Ubushushu obusebenzayo: Uluhlu lwamaqondo obushushu exesha elide
Ukugoba iradius: Ngaphantsi kwamaxesha ama-6 omzobo wangaphandle wentambo.
IBakala eliyiDolophu ihlawulelwayo: Imnkenisa kwi-IEC 60332-1
Iimpawu zobugcisa
I-voltage esebenzayo: I-300/500 i-volts
I-Voltage yoVavanyo: ngo-2000 i-volts
Ukutshintsha i-radius: 8 x o
I-radius elungisiweyo ye-radius: 6 x o
Uluhlu lobushushu: 30O c ukuya + 60O c
Iqondo lokushisa esifutshane: +200 O C
Ilangatye liyintoni: IEC 60332.1
Ukunganyangeki kwe-insenter: 20 mω x km km
Umgangatho kunye nokuvunywa
I-Cei 20-19 / 4
I-Cei 20-35 (Enc6033-1)
I-CEP yeViltage Foyitity 73/23 / I-EEC & NEC & 93/68 / EEC.
IEC 60245, i-rohs iyahambelana
Iimbonakalo
Ukuguquguquka kunye nokunganyangeki kwe-abrasion: Ngenxa yokusetyenziswa kwerabha njengendawo yokufakelwa kunye nokushenxisa izinto,H05rr-fIntambo inobutshaba obuhle kakhulu kunye nokunganyangeki kwe-abrasion.
Ukubanda, ubushushu, amanzi kunye nokunganyangeki kwelanga: Ilungele iindawo ezibandayo nezomeleleyo, kunye nendawo yeoyile kunye ne-oyile.
Ukukhusela okusingqongileyo, ukuchasana nokuchasana nokuchasana nokwaluphala: i-rohs kunye nokufikelela kwintsebenzo ehambelana, efanelekileyo kwizicelo ezifunwayo kwindalo.
Ukusebenza kwedangatye elihlawulelweyo: Dlulisa i-IEC 60332-1
Izicelo
Isixhobo sombane soMbane: Ilungele ukudibanisa izixhobo zombane ngokuxhomekeke kwingcinezelo ephakathi, ezinje ngezixhobo zekhaya, izixhobo zamandla, ukukhanya kwangaphandle, njl njl.
Izixhobo zokulima igadi: inokusetyenziswa njengentambo yoqhagamshelo kwizixhobo zokulima igadi kumanzi kwaye ayomileyo okanye ngaphandle.
Izixhobo zesoftware: Ifanelekile kuzo zonke iintlobo zombane zombane kunye nezixhobo zamandla ezifuna ukufuduselwa rhoqo.
Indawo ekhethekileyo
Ngenxa yokuguquguquka kwayo, ukunganyangeki kwe-abrasion-ukunganyangeki, iimpawu ezinganyangekiyo kunye nezingasebenzi, i-H05rr-F Intambo isetyenziswa kakhulu kunxibelelwano lombane kwindalo yangaphandle kunye nengqwabalala.
Ipharamitha yecabula
| I-awg | Hayi. Ye-Cous X | Ubungqingqwa bokufakwa | Ubungqingqwa bokuthi gca | Ububanzi buphi | Ubunzima be-Copper | Ubunzima bokuthintela |
|
| # x mm ^ 2 | mm | mm | mm (min-max) | kg / km | kg / km |
| (24/32) | I-2 x 0.75 | 0.6 | 0.8 | 5.7-7.4 | 14.4 | 61 |
| (24/32) | I-3 x 0.75 | 0.6 | I-0.9 | 6.2-8.1 | 21.6 | 75 |
| (24/32) | I-4 x 0.75 | 0.6 | I-0.9 | 6.8-8.8 | 28.8 | 94 |
| (24/32) | I-5 x 0.75 | 0.6 | 1 | 7.6-9.9 | 36 | I-110 |
| 17 (32/32) | I-2 x 1 | 0.6 | I-0.9 | 6.1-8.0 | 19 | 73 |
| 17 (32/32) | I-3 x 1 | 0.6 | I-0.9 | 6.5-8.5 | 29 | 86 |
| 17 (32/32) | I-4 x 1 | 0.6 | I-0.9 | 7.1-9.3 | 38.4 | I-105 |
| 17 (32/32) | I-5 x 1 | 0.6 | 1 | 8.0-10.3 | 48 | I-130 |
| 16 (30/30) | I-2 x 1.5 | 0.8 | 1 | 7.6-9.8 | 29 | 115 |
| 16 (30/30) | I-3 x 1.5 | 0.8 | 1 | 8.0-10.4 | 43 | 135 |
| 16 (30/30) | I-4 x 1.5 | 0.8 | 1.1 | I-9.0-11.6 | 58 | 165 |
| 16 (30/30) | I-5 x 1.5 | 0.8 | 1.1 | 9.8-12.7 | 72 | I-190 |
| ((50/30) | I-2 x 2.5 | I-0.9 | 1.1 | I-9.0-11.6 | 48 | I-160 |
| ((50/30) | I-3 x 2.5 | I-0.9 | 1.1 | 9.6-12.4 | 72 | 191 |
| ((50/30) | I-4 x 2.5 | I-0.9 | 1.2 | 10.7-13.8 | 96 | 235 |
| ((50/30) | I-5 x 2.5 | I-0.9 | 1.3 | 11.9.3 | I-120 | 285 |
